Introduction

In this guide, we will show you how to replace an overcharged, low-performance hard-rubber coupling in a Kitchen Aid Mixer 5KSB52 UltraPower.

Disconnect the blender from the power supply. Prepare tools and spare parts. Tools required: original spanner, small water pump tongs. Spare part: hard rubber coupling
  • Disconnect the blender from the power supply. Prepare tools and spare parts. Tools required: original spanner, small water pump tongs. Spare part: hard rubber coupling

Add Comment

Loosen the defective coupling with water pump tongs  and original open-ended spanner. Hold the axis with an open-ended spanner and unscrew the coupling. Remove coupling.
  • Loosen the defective coupling with water pump tongs and original open-ended spanner. Hold the axis with an open-ended spanner and unscrew the coupling. Remove coupling.

Add Comment

  • Insert the new coupling and screw it on slightly. Screw the new coupling by hand with a spanner.

Add Comment

  • Finished.

Add Comment

Conclusion

Repeat the steps in reverse order to reassemble your device.

One other person completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Froebel Christian

Member since: 02/02/2016

345 Reputation

2 Guides authored

Team

iFixit EU Team Member of iFixit EU Team

Community

34 Members

609 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 34

All Time: 952