Introduction
If your Kingston HyperX Cloud II headphone bracket becomes broken due to it having the plastic piece being stepped on, fully extended, or stuck in position, use this guide to repair or replace your bracket.
What you need
-
-
Use a Phillips #0 screwdriver to remove the two 11 mm screws from the bracket support.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
IUPUI, Team 1-4, Harley Spring 2023 Member of IUPUI, Team 1-4, Harley Spring 2023
IUPUI-HARLEY-S23S1G4
3 Members
3 Guides authored
