Kindle Fire Back Case Replacement

You're viewing a previously published version of this guide. View latest version

Sep 04, 2013 - 05:13:44

Jun 24, 2015 - 08:20:08 Sep 04, 2013 - 05:13:44 Jul 31, 2013 - 04:20:12 May 04, 2012 - 02:59:04 Mar 22, 2012 - 01:19:28 Feb 21, 2012 - 05:57:21 Feb 21, 2012 - 05:57:15 Feb 21, 2012 - 05:09:03 Feb 09, 2012 - 10:32:56 Feb 09, 2012 - 10:30:46 Feb 08, 2012 - 04:53:21 Feb 08, 2012 - 04:52:51 Feb 08, 2012 - 04:52:23 Feb 08, 2012 - 04:47:54 Feb 08, 2012 - 04:47:53 Feb 08, 2012 - 04:46:13 Feb 08, 2012 - 04:46:11 Feb 08, 2012 - 04:43:10

Newer

Introduction

Remove the back case from your Kindle Fire to access its internal components.

What you need

Step 1 Back Case

Kindle Fire Back Case Replacement, Back Case: step 1, image 1 of 3

Kindle Fire Back Case Replacement, Back Case: step 1, image 2 of 3

Kindle Fire Back Case Replacement, Back Case: step 1, image 3 of 3

Wedge a plastic opening tool into the lower right corner of the Kindle Fire.
Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other.
If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger to undo the first clip, then switch back to the opening tool to avoid scratching your case.
It is helpful to pry the bottom of the Kindle Fire away (and out from the side) from the top part. Exerting too much force attempting to split the two without pulling away can cause the tabs on the inside to crack.