Skip to main content

Introduction

If your Keurig is unable to turn on, you may need to replace your power cable with this guide.

Parts

No parts specified.

  1. Access the bottom of the Keurig by flipping it on its side. Access the bottom of the Keurig by flipping it on its side.
    • Access the bottom of the Keurig by flipping it on its side.

  2. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  3. Remove the five 13mm Phillips #0 screws securing the bottom case. Pull the silver cover off of the device. Pull the silver cover off of the device.
    • Remove the five 13mm Phillips #0 screws securing the bottom case.

    • Pull the silver cover off of the device.

  4. To remove the power cable, highlighted in red, follow iFixit's guide on soldering. The ground cable, highlighted in orange, needs to be re-soldered to your new power cable. The ground cable, highlighted in orange, needs to be re-soldered to your new power cable.
    • To remove the power cable, highlighted in red, follow iFixit's guide on soldering.

    • The ground cable, highlighted in orange, needs to be re-soldered to your new power cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

William O'Brien

Member since: 01/23/2018

473 Reputation

4 Guides authored

Team

Cal Poly, Team S1-G3, Livingston Winter 2018 Member of Cal Poly, Team S1-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 15

All Time: 353