Introduction

When you want to make a new seal in the drainage valve when too much water occurs.

Tools

Parts

No parts required.

Image 1/3: i made many pictures Image 2/3: you only need a little screwdriver Image 3/3: you only need a little screwdriver
  • Look at the pictures

  • i made many pictures

  • you only need a little screwdriver

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pictures from front and back

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • easy

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • snap, it comes out.

Add Comment

Image 1/3: Green lines show the places of the seals. Image 2/3: Red lines show where to put the clamps. Image 3/3: Red lines show where to put the clamps.
  • details, look.

  • Green lines show the places of the seals.

  • Red lines show where to put the clamps.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • the parts

Add Comment

Image 1/1:
  • here you have all responsible parts please

Add Comment

Image 1/3: look at the parts Image 2/3: look at the parts Image 3/3: look at the parts
  • REASEMBLY

  • look at the parts

Add Comment

Conclusion

Better pictures

One other person completed this guide.

Special thanks to these translators:

100%

Schwarzstein is helping us fix the world! Want to contribute?
Start translating ›

Schwarzstein

Member since: 07/15/2013

2,025 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 22

All Time: 321