Introduction

This guide will guide the user to effectively remove and replace the battery. This replacement will take 20-30 minutes. However, if the guide is followed to the letter, the task will be accomplished with minimal damage to the device.

Image 1/1:
  • remove the screws at the four corners of the device.

Add Comment

Image 1/2: Image 2/2:
  • Use a prying tool to pry the back panel from the tablet chassis. Pry the panel at different locations around the device to separate clips.

Add Comment

Image 1/1:
  • Use a soldering iron to remove power cables from battery. The power cable is shown at the corner of the battery in the picture.

Add Comment

Image 1/2: Image 2/2:
  • Use a tool to carefully pry battery away from chassis. The battery is attached by an adhesive. Slowly pry battery on the side away from the motherboard.

Add Comment

Image 1/1:
  • You have successfully removed the battery. Put new battery in the same location. Solder the supply wires. Reapply tape in original location.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austen Shields

Member since: 09/26/2015

101 Reputation

1 Guide authored

Team

IUPUI, Team 1-3, Wilson Fall 2015 Member of IUPUI, Team 1-3, Wilson Fall 2015

IUPUI-WILSON-F15S1G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 237