Skip to main content

Jabra Speak 510 Outer Casing Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Jabra Speak 510 Outer Casing Replacement, Outer Casing: step 1, image 1 of 2 Jabra Speak 510 Outer Casing Replacement, Outer Casing: step 1, image 2 of 2
    • Using a metal spudger, peel back the foam pad on the bottom of the device to reveal six screws.

  2. Jabra Speak 510 Outer Casing Replacement: step 2, image 1 of 1
    • Remove the six 20 mm T6 screws from the bottom of the device.

  3. Jabra Speak 510 Outer Casing Replacement: step 3, image 1 of 2 Jabra Speak 510 Outer Casing Replacement: step 3, image 2 of 2
    • Remove the back plate and the grey foam underneath.

  4. Jabra Speak 510 Outer Casing Replacement: step 4, image 1 of 3 Jabra Speak 510 Outer Casing Replacement: step 4, image 2 of 3 Jabra Speak 510 Outer Casing Replacement: step 4, image 3 of 3
    • Use a small, pointed metal spudger to release the plastic tabs connecting the faceplate to the bottom of the speaker.

    • A small cable connects the faceplate to the device. Carefully disconnect the cable before fully opening the device.

    • Slowly flip the device open like a clam shell.

    • There are several wires soldered to the motherboard that prevent the faceplate from detaching completely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jordan Murphy

Member since: 02/16/16

717 Reputation

3 Guides authored

Team

IUPUI, Team 2-3, Harley Spring 2016 Member of IUPUI, Team 2-3, Harley Spring 2016

IUPUI-HARLEY-S16S2G3

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 135