Introduction

To complete this guide, you will need to purchase a new battery compartment cover and make sure that you have the tools listed. While it is not necessary to remove the battery to be able to remove the battery cover, it is always good practice to make sure that the device is completely powered off before attempting any repairs.

Parts

No parts required.

Find the side of the camera that looks like this.
  • Find the side of the camera that looks like this.

Add Comment

Push down on the black switch.
  • Push down on the black switch.

Add Comment

While still pushing down on the black switch, slide back the battery cover (see photo for direction).
  • While still pushing down on the black switch, slide back the battery cover (see photo for direction).

Add Comment

Push the cover up to open the battery compartment, and then push the blue battery release switch. Push the cover up to open the battery compartment, and then push the blue battery release switch.
  • Push the cover up to open the battery compartment, and then push the blue battery release switch.

Add Comment

You can now take the battery out of the camera.
  • You can now take the battery out of the camera.

Add Comment

After removing the battery, take out  the two Phillips screws (4mm headsize x 3mm length) screws. You can now remove the battery cover.
  • After removing the battery, take out the two Phillips screws (4mm headsize x 3mm length) screws. You can now remove the battery cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christina Michelle Johnson

Member since: 01/15/2015

921 Reputation

8 Guides authored

Team

USF Tampa, Team 1-2, Tanski Winter 2015 Member of USF Tampa, Team 1-2, Tanski Winter 2015

USFT-TANSKI-W15S1G2

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 31

All Time: 660