Introduction
When reattaching the grill, apply a small amount of super glue (cyanoacrylate) on the retention pockets on the housing.
OPTIONAL: Dry fit (No glue) the speaker grill to the speaker housing. Attach a single piece of masking tape that wraps from the top to the back of the speaker. Then unfold the speaker grill so the tape acts as a hinge to align the two parts. Then place glue on the retention tabs.
Apply downward pressure on the top of the grill to ensure glue adhesion. Additionally, masking tape can be wrapped around the speaker for the same effect.
What you need
-
-
Insert the iFixit opening tool between the speaker grill and speaker housing and pry around the entire perimeter of the device until the grill releases.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team 1-5, Petersen Spring 2022 Member of UMass Dartmouth, Team 1-5, Petersen Spring 2022
UMASSD-PETERSEN-S22S1G5
3 Members
6 Guides authored
