Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide details the steps to take off the rear cover of your Inter-tel IP 8660.

Parts

No parts specified.

  1. Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.
    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

  2. Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out. 8 mm long 11 mm long
    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

    • 8 mm long

    • 11 mm long

  3. Lift up the back cover and set it aside.
    • Lift up the back cover and set it aside.

Mariano Bautista

Member since: 01/20/2012

16 Reputation

2 Guides authored

Team

Cal Poly, Team 11-24, Maness Winter 2012 Member of Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 Members

7 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 502