Introduction
How to remove the SIM card from the 1st Generation iPhone.
What you need
-
-
Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.
-
Press down on the paper clip until the SIM card tray pops out.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
41 other people completed this guide.
6 Comments
Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.
