Introduction

Use this guide to replace a dead hard drive.

Video Overview

Image 1/1: Three 14.4 mm Phillips #00 screws
  • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

Does void the warranty?

jfondeur - Reply

No, it does not void the warranty. More specifically: http://eshop.macsales.com/Search/display...

oakdragon12 - Reply

How much weight can I save by removing the optical drive?

gunes314 - Reply

You can save a lot of weight if lets say your installing a solid state drive or putting in a second hard drive but if you know that you use the CD/DVD disc drive a lot then you might just want to leave the drive alone.

Marshall WahlstromHelgren -

Also wondering how much weight I'd save by just removing. My drive is broken for ages, but I have not needed it in ages. The HD was already replaced by a cheap SSD (second best thing after upgrading to 8GB), so I'd appreciate losing some weight. I mean, the computer. Although I could lose some too... erm... well, anyway, I guess the lack of the DVD would not interfere with anything, right? Opinions?

Carlos Duarte do Nascimento - Reply

Apple has meticulously balanced the MacBook's weight from left to right, and removing the optical drive may off-balance the Mac.

skimmilk05 -

What so you think that a removing the optical drive which weighs less than a AA battery will unbalance a MBP making it unusable? LOL!

Unless you use the MBP on a high wire (an even then I have my doubts) you'd never notice the weight difference.

pmhparis -

I'm thinking you'd probably be OK losing the DVD drive without a problem. Just make sure the optical drive cable is secured or you might hear it rattling in there from time-to-time.

John Adam Wickliffe - Reply

Hey guys,

this website is amazing. I read it to guide me on fixing my mac book pro, but on the video, the girl gives a wrong information.. She says that is not possible replace just the keyboard... But I managed to replace only my keyboard. It is boring because I have to remove approximately 70 screws but it is possible. Thanks a lot! You guys helped me save about US$300 thats because in Brazil some technicians would charge me with that amount!

I posted some pictures on your facebook page..

renatumb - Reply

Tip: Use one of those weekday pill holders to have a cheep way to store screws you remove and each day of the week can be for different sizes or parts. It has been handy to have (much less expensive than the magnetic mat.

Robert Wacker - Reply

Great tutorial. I found that using a Phillips #0 in lieu of the #00 worked much better.

kschmesk - Reply

I tried the PH #00 for the 10 screws that hold the bottom case and it's too big, instead PH #000 works perfectly. Are you sure this screws are #00?

Alex - Reply

The likely problem with your wifi is not the card but the antenna leads that go into the plastic clutch

. Ifixit don't have a guide to change this as it it includes the isight camera so the screen has to be disassembled which is fairly hard

I got round it by using the camera cable from the old set and cutting off the new one

brian whittle - Reply

Hello MacWorld,

Just want to say that this site is a great resource for repairing or upgrading your Mac. I had a bad SATA cable in my MacBook Pro and after ordering a new one from the "IFIXIT" site I received the cable within two days, replaced it and was up and running again in no time. Thanks IFIXIT for you help!

wer 10/5/15

tayseer999 - Reply

I have found that my MacBook Pro 13 Late 2011 has five shouldered screws and not four. I am not sure exactly where it goes but I have put it in the top left corner of the picture as it is the odd one out.

GotMac - Reply

Hello, where can I buy the screws I need in case I lose one of them?

taylornya - Reply

on my device the #00 screwdriver was a bit too small. a #0 was the perfect one

Maximilian Klotz - Reply

I found with mine that the shouldered and un-shouldered screws were reversed (the three un-shouldered screws going where the orange colour indicates). Also, I found that the front four screws went in at an angle.

gilded yak - Reply

I need to know why my party can't hear. Me on my android phone

Tina Porter - Reply

Because that party is inside your head Tino. Just close your eyes and enjoy the tunes

Snuf Box -

Are you sure the short screws are different? The set sold here just says “Seven 3 mm Phillips #00 screws.”

Jack - Reply

I have one stripped screw... How opening without drill it?! Any suggestions please?

rodrigosady - Reply

Image 1/2: Remove the lower case. Image 2/2: Remove the lower case.
  • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

  • Remove the lower case.

Add Comment

Image 1/2: It is useful to pry upward on both short sides of the connector to "walk" it out of its socket. Be careful with the corners of the connectors, they can be easily broken off. Image 2/2: It is useful to pry upward on both short sides of the connector to "walk" it out of its socket. Be careful with the corners of the connectors, they can be easily broken off.
  • Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.

  • It is useful to pry upward on both short sides of the connector to "walk" it out of its socket. Be careful with the corners of the connectors, they can be easily broken off.

Is this step of removing the battery connector required?

manodh - Reply

yes - as with disassembly of any electronic component you have to remove any power source. You don't want to accidentally turn the Mac on

khull -

This step is not really required. Apple does not recommend it.

Steven Layton - Reply

My Battery does not get recognized after i disconnected it, screw this site!

Diego Hernandes -

Rather than be careful of the corners of the connector i would say don't use the spudger anywhere near the corners. While the corner looks like the obvious place to begin to pry it up from, it will break. Levering from the sides as the instructions suggest works well.

ausmkv - Reply

wonder why apple does not recommend it?!

Peter - Reply

I would recommend it, one careless short and the whole board is dead......

John - Reply

simply remove the battery rather than disconnecting the cable

toiu - Reply

Don't know what the deal is with the battery, but this IS a necessary step to keep from frying the logic Board if you accidentally touch something and short it out. I did this step every time during my troubleshooting and The battery was ALWAYS recognized by the system the next time I turned the MBP on. So be safe and don't fry your logic board in the process...

fasthans - Reply

Prying the battery connector off does not take much force. I did exactly what the guide suggested (walked it off back and forth) with the spudger without any problems. Just be very gentle, much like with anything inside laptops, they are very fragile and need to be worked with carefully. A+ instructions, battery replacement was a success.

aekinaka - Reply

Installed/upgraded 4gb RAM to the system maximum 16gb and installed a 500 gb SSD today....DID NOT disconnect the battery cable....no issues at all when I powered back up. Then did a clean install of OSX Yosemite....next I used a time machine backup to put all my stuff back on the new HD. From start to finish it took about 4 hours. Macbook boots up right at 16 seconds now.

MacProUser - Reply

Easiest to use two spudgers, one on each short end, I found.

Simon Mundy - Reply

I took off th Airport /Bluetooth connectors but the number J3 connector is broken and so where can i buy J3 connecter for the Airport/bluetooth board

Zeerachen - Reply

Its a lot easier and safer (corner wise) to pry it using the flat side of the black spudger directly in front of the connector (don't go/use the corners) very easily you will be able to pry it further by inserting the spudger into a better and thicker plastic section of the connector

Ed Oliver - Reply

DON'T remove the Battery Cable, you risk the battery NOT being recognised when you start the Mac up again, or breaking it!! More to the point, APPLE DOES NOT RECOMMEND THIS, so don't do it! I Installed 2x 8GB ( 16Gb total) of Crucial Mac RAM at 1333Mhz for my Late 2011 MacBook Pro, and it works beautifully, fully recognised and working well. I followed these instructions, but as Apple didnt recommend disconnecting the battery, I skipped this step, and as well as taking less time, nothing was damaged or broken, and everything works perfectly!!! Just make sure that you DISCHARGE ALL STATIC ELECTRICITY FROM YOUR HANDS, by touching a metal surface in the Mac. Apple recommends the edge of the Optical Disk Drive ( Big silver thing ) before touching any parts. Also, Take care removing the RAM out of its packet, DO NOT touch the Gold connectors, and hold the RAM by the edges. Finally, be PATIENT, GENTLE and it should all go perfectly. I managed it first time, with no technical ability, so follow my advice. Good luck!

Bradley Marks - Reply

Followed the tuto Step by step. Disconnected the battery (quite easily).

No problem when I lit the Mac on again. Battery's here, date's right.

nichoferr - Reply

Switch off your Mac and continue without disconnecting the battery. Don't know how it will switch on by itself.

Mfernandez - Reply

This comment made me think that disconnecting the battery was no point at all, because really - how would the computer be able to switch on by it self. So... I had my mac flipped around and was fiddling with the last part of the guide when I all of a sudden hear the start up sound! Don't know how and why it did. I turned it around with it guts open and guts hanging out. Screen was on. I forced it to shut down by keeping the power button down. Turned it back and first thing removed the battery cord.

Luckily the computer started up just like normal. But hearing that sound was just too scary.

BTW I had been cautious to de static myself multiple times.

wassberg -

Image 1/1:
  • Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.

What are the changes of it broke when i bend it?, after i disconect it does not work anymore

Diego Hernandes - Reply

The guide worked perfectly, as it has in the past (our family has three Mid-2012 Macbook Pros that have been separately upgraded with RAM and SSD).

The PH00 screwdriver fit perfectly.

One note on getting the screws to seat easily and thread perfectly...always turn them gently a couple turns to the left (CCW or Anti-Clockwise) until you hear a small click. That's where the threads will grab. Works with any screw, but when threads are fine, this will help ensure that the screw is at the correct angle and will grab and seat perfectly.

Great guides. Thanks!

timgunkel - Reply

Got RAM in but only one slot is working and now I can't remove! The RAM won't pop up like before and tabs don't seem to do anything. Please advise.

Sal Ergrapes - Reply

Image 1/1: These screws will remain attached to the hard drive bracket.
  • Remove the two Phillips screws securing the hard drive bracket to the upper case.

  • These screws will remain attached to the hard drive bracket.

These were Philips #0 screws in my computer.

Church Tucker - Reply

Image 1/1: The hard drive bracket may be firmly seated against the upper case.
  • Remove the hard drive bracket.

  • The hard drive bracket may be firmly seated against the upper case.

Don't miss this step: I almost did and of course couldn't get the disk out until I looked at the video !

francistasset - Reply

Image 1/1: Don't try to completely remove the hard drive just yet. It is still attached to the hard drive cable.
  • Use the attached pull tab to lift the hard drive out of the upper case.

  • Don't try to completely remove the hard drive just yet. It is still attached to the hard drive cable.

Add Comment

Image 1/2: Remove the hard drive. Image 2/2: Remove the hard drive.
  • Pull the hard drive cable away from the body of the hard drive.

  • Remove the hard drive.

Add Comment

Image 1/2: Transfer the hard drive retaining posts to your new hard drive. Image 2/2: If desired, transfer the pull tab over to your new hard drive.
  • Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

  • Transfer the hard drive retaining posts to your new hard drive.

  • If desired, transfer the pull tab over to your new hard drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

  • If you upgraded your EFI Firmware ROM you can also perform an internet recovery.

T5, not T6 on mine.

pilzn - Reply

Reinserting the tiny screws was a pain, until I discovered this: initially turn them counterclockwise, till the threads 'agree' and the screw drops down into it's threded slot. Then go clockwise and they seat properly.

Dave - Reply

The paint on the screw threads makes it a little finicky to get them to 'find' the threading in their matching holes.

Bad words were said, but job complete.

Dave - Reply

T6 were just too small to fit the screws of the retaining post, and T8 was just too big. I suspect a T7 will fit. I will get a T7 screwdriver and report back.

Beware other users: T6 as the guide suggests may not be the correct choice for all.

fludiumvatn - Reply

I tries every T there is and eventually got a grip. But they just won't turnê. I evento tries using pliers but the screws stay unmovabble.

Julio Lobato - Reply

If replacing the hard drive with a 7mm SSD, is a spacer required? This guide from Crucial suggests it is, but there's no mention of it here.

http://guides.crucial.com/Guide/MacBook+...

Just wondering if people are managing without the spacer.

Jeff Smith - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

255 other people completed this guide.

Andrew Optimus Goldberg

Member since: 10/17/2009

282,309 Reputation

660 Guides authored

Team

iFixit Member of iFixit

Community

106 Members

4,542 Guides authored

19 Comments

You saved me $150 by helping me replace my hard drive on my own! Thank you!!! I know where to turn when my mac acts up now!!

Jennie - Reply

In case you need to install/reinstall your OS, the new MBPs no longer come with an install disc. To install your OS you will need to hold down CMD + R while booting up until it chimes. It will then walk you through the process.

Lynzi - Reply

I needed to install the OS X in the new HD using a USB (manual in applesfera), then I was surprised when after do all this guide I see a message "Can't verified the copy...." I fixed reinstalling my old HD, and run the old OS, changed the date and time, I change again the HD, but (this is the important) don't pull off the battery connector. If you disconnect the battery, the system lost the date and time and yo can't install the OS X with and USB. I don't test the cmd + R option.

Agustin Jimenez Fernandez - Reply

Awesome guide. Very easy to follow. Took me less than 10 minutes to do the whole thing.

Roberto - Reply

Hi, I just replaced the original 750 gb hard drive on my machine that was having some problems. I replaced it with a 1tb hdd pluss ssd combo thing from seagate. When i booted and held down the option key the drive wasn't recognized at all. Any help would be greatly appreciated

erik35angeli - Reply

I have tried 8 hard disks but none of them worked... Some of them can't be detected at all while some cannot pass through initialization process... Mac has got compatibility issues.

uniashish -

What are some solutions if restored the computer before replacing the hard drive? How will I be able to install Os X Mavericks then?

milushik411 - Reply

Hello,

Do you know if the unibody macbooks (Specifically the mid-2012 13") can hold up the new 2TB HDDs? I would like to upgrade mine but I am little bit skeptical.

Frankiescou SC - Reply

Great guide that worked fine... however to actually get the computer going with a new drive (the old one was dying so I decided not to clone it) I had to do the following

1. Create OSX installer on a usb thumb drive

2. install the new drive (following this guide)

3. Start up with thumb drive inserted

4. Format the new drive using disk utilities (the disk is not recognised until you do this)

5. Reset the date using terminal (until I did this the installer would not work)

6. Install the new OS

jeremyyoung - Reply

Hi! I am having this same issue...could you provide me with more detailed steps as to how to do this. No worries if not. Thanks!

amandalee4443 -

How can I format to macintosh journaled if my ssd wasn't detected on the disk utility ? Well I double checked I followed this tutorial but somehow my ssd wasn't in the disk utility. I used corsair neutron xt 240GB. Any advise perhaps ?

Aryo Prakarsa -

What's the largest size SSD I can fit in the optical bay? Mid '12 macbook pro model.

bkslynger - Reply

What kind of Hard Drive can I replace? Normal one with 2.5 inches and 7mm for general laptop can be replace?

Thanks!

cheanakhim - Reply

Thanks for the guide. I am stuck on unscrewing the torx screw. I have a T6 screwdriver but i cannot remove them i don't know why. Any help with this issue guys? Thanks :-)

uzapuca - Reply

I am stuck at unscrewing the Torx screws. I have a T6 screwdriver but is not right. Any help with this issue? Thanks! :-)

uzapuca - Reply

When upgrading to SSD, I don't see anything here about the TRIM setting.

https://www.cnet.com/how-to/installing-s...

The Mac won't enable TRIM automatically. You need this if you want your SSD to last. It makes it work more efficiently.

In fact, this tip should be on every iFixIt instruction page for all Macs HDD upgrade pages. Not just this one.

rondlarson - Reply

I wanted to add that Apple has added a new command named TrimForce in Yosemite+ that forces on TRIM in third party SSD.

http://osxdaily.com/2015/10/29/use-trimf...

rondlarson - Reply

Does it seem reasonable to back up the entire hard drive to another hard drive via Time Machine,

and then replacing the original drive with the one containing the back up?

Anrothan O'Bran McFal - Reply

Does a 12.5mm 1TB HDD work?

Aakaash Jois - Reply

Add Comment

View Statistics:

Past 24 Hours: 408

Past 7 Days: 3,093

Past 30 Days: 14,854

All Time: 361,685