MacBook Pro 13" Unibody Mid 2009 RAM Replacement
This guide has been found to be exceptionally cool by the iFixit staff.
- Author: Walter Galan
- Difficulty: Easy
Accessing the RAM in this computer is straightforward and requires minimal disassembly.
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
Seven 3 mm Phillips screws.
Three 13.5 mm Phillips screws.
Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board.
Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.