Fix Your Stuff Community Store

Insignia NS-HTMC01-B Front Case Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Insignia NS-HTMC01-B Front Case Replacement, Front Case: step 1, image 1 of 3 Insignia NS-HTMC01-B Front Case Replacement, Front Case: step 1, image 2 of 3 Insignia NS-HTMC01-B Front Case Replacement, Front Case: step 1, image 3 of 3

    • Flip the device over so the back panel faces up.

    • Unscrew the four screws counter-clockwise from the back panel using a 4mm Phillips screwdriver.

    • You may want to use a flashlight during this step, as the screws are hard to see.

    • Make sure to firmly connect your screwdriver with the head of the screw. A loose connection can strip the screw head, making the screws nearly impossible to remove.

    Edit

  3. Insignia NS-HTMC01-B Front Case Replacement: step 2, image 1 of 1

    • Take the screws out and set them aside.

    • Be sure to set them somewhere flat, so they don't roll away.

    • Gently pull the front panel and back panel apart to open the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 15