Introduction

Removing the batteries is an important step before replacing any device components in order to avoid shock from electrical components. The Insignia NS-HDRAD Radio uses AA batteries. Please note that batteries are not required if the device is only used when connected to an electric outlet.

Tools

No tools required.

Parts

Image 1/2: Or, if using the charger, remove the power cord. Image 2/2: Or, if using the charger, remove the power cord.
  • Be sure the radio is turned off by pressing the red power button.

  • Or, if using the charger, remove the power cord.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the panel on the back side of the radio by pressing the arrow in a downward motion.

Add Comment

Image 1/3: The battery's positive terminal is indicated by a "+" on the side. Image 2/3: Remove the adjacent battery by simply pulling it out of the holder. Image 3/3: Repeat for the bottom row of batteries.
  • Remove the batteries one-by-one by pulling from the positive terminal of the top left battery.

  • The battery's positive terminal is indicated by a "+" on the side.

  • Remove the adjacent battery by simply pulling it out of the holder.

  • Repeat for the bottom row of batteries.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Joshua Miller

Member since: 09/22/2015

385 Reputation

3 Guides authored

Team

Baylor, Team 4-3, Williams Fall 2015 Member of Baylor, Team 4-3, Williams Fall 2015

BU-WILLIAMS-F15S4G3

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 84