Skip to main content

Insignia NS-D160A14 Front Panel Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Insignia NS-D160A14 Front Panel Replacement, Outer Case: step 1, image 1 of 1
    • Unplug the power cord before proceeding to open the DVD player's enclosure.

    • Remove the two 7mm Phillips #2 screws from the back of the DVD player.

  2. Insignia NS-D160A14 Front Panel Replacement: step 2, image 1 of 1
    • Carefully lift the outer case up, starting from the back.

    • Removing the outer case may require some force, and you will need to get the case into an angled position compared to the rest of the DVD player before it can be completely separated.

  3. Insignia NS-D160A14 Front Panel Replacement, Front Panel: step 3, image 1 of 3 Insignia NS-D160A14 Front Panel Replacement, Front Panel: step 3, image 2 of 3 Insignia NS-D160A14 Front Panel Replacement, Front Panel: step 3, image 3 of 3
    • Unhook the 4 hooks on the main casing.

    • There is one hook on the top of the casing, one on the bottom, and one on each side.

    • These hooks are brittle and can easily break.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ian Hanken

Member since: 07/20/16

516 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 71