Insignia NS-CLIP02 Motherboard Replacement

Step 1 Motherboard

• Locate the bottom of the device.
Step 2

• Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw beneath the sticker.
Step 3
• Locate the 11mm screw beneath the sticker.
Step 4
• Using a plastic opening tool, peel off the adhesive gel stoppers
Step 5
• Continue peeling the rest of the gel stoppers from the bottom of the device.
Step 6
• Begin unscrewing the six 11mm screws with a Phillips head screw driver.
Step 7
• Once you peel of the bottom from the device, you will see the motherboard.
Step 8
• Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
Step 9
• Lift the motherboard from the device.
Step 10
• Locate the four plugs connecting the motherboard to the rest of the device.
Step 11
• Begin with remove the plug to your left.
Step 12
• Remove the plug to your right from the motherboard.
Step 13
• Remove the plug in the front of the lcd screen plug.
Step 14
• Remove the LCD screen plug last. Then, follow the following instructions in reverse to replace the old motherboard with the new one.

Author

with 6 other contributors

Erik

Member since: 02/19/15

405 Reputation

4 Guides authored

Badges: 5

• 
• 
• 

+2 more badges

Team

USF Tampa, Team 9-3, Leahy Winter 2015 Member of USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview