Parts

No parts required.

Insert a plastic opening tool into the seam between the back casing and the screen to separate the back casing from the tablet. You may need to use a metal opening tool for extra prying power, but beware that it can scratch your device or damage the internal components if the tool is inserted too deep.
  • Insert a plastic opening tool into the seam between the back casing and the screen to separate the back casing from the tablet.

  • You may need to use a metal opening tool for extra prying power, but beware that it can scratch your device or damage the internal components if the tool is inserted too deep.

  • You will hear the tabs pop as you separate the back casing around the tablet.

Add Comment

Lift the back casing away from the rest of the device which should include the exposed circuit board and screen. Set the casing aside.
  • Lift the back casing away from the rest of the device which should include the exposed circuit board and screen.

  • Set the casing aside.

Add Comment

Deck the Halls
With tools and Fix Kits
Wedge a plastic opening tool in between the male, black module and female, white module  to disconnect the wires module from the circuit board. Wedge a plastic opening tool in between the male, black module and female, white module  to disconnect the wires module from the circuit board.
  • Wedge a plastic opening tool in between the male, black module and female, white module to disconnect the wires module from the circuit board.

Add Comment

Use a plastic opening tool to pry the battery  from the circuit board by wedging it around the perimeter of the battery. Use a plastic opening tool to pry the battery  from the circuit board by wedging it around the perimeter of the battery. Use a plastic opening tool to pry the battery  from the circuit board by wedging it around the perimeter of the battery.
  • Use a plastic opening tool to pry the battery from the circuit board by wedging it around the perimeter of the battery.

Add Comment

Remove the battery from the circuit board by lifting it with the spudger or finger.
  • Remove the battery from the circuit board by lifting it with the spudger or finger.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Jeremy Anaya

Member since: 09/23/2015

316 Reputation

2 Guides authored

Team

Baylor, Team 6-7, Williams Fall 2015 Member of Baylor, Team 6-7, Williams Fall 2015

BU-WILLIAMS-F15S6G7

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 25

All Time: 1,274