Fix Your Stuff Community Store

Insignia Flex 10.1 NS-P10A6100 Back Case Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prerequisite Only

What you need

  1. Insignia Flex 10.1 NS-P10A6100 Back Case Replacement, Back Case: step 1, image 1 of 1

    • Make sure your tablet is turned off and not connected to a power source to prevent personal injury.

    • The volume rocker and power button located on the top edge by the camera are not connected pieces and will become free from the device once the front panel is removed from the back case. They are easily put back in place when reassembling the tablet.

    • Position the tablet with the top edge by the camera facing down.

    • Insert the plastic opening tool between the front panel and back case at the upper left hand corner of the tablet.

    Edit

  3. Insignia Flex 10.1 NS-P10A6100 Back Case Replacement: step 2, image 1 of 2 Insignia Flex 10.1 NS-P10A6100 Back Case Replacement: step 2, image 2 of 2

    • Slide the plastic opening tool along the edge of the tablet between the front panel and back case.

    • Repeat this process for the two shorter edges of the tablet leaving the top edge by the camera still snapped in place.

    Edit

  4. Insignia Flex 10.1 NS-P10A6100 Back Case Replacement: step 3, image 1 of 1

    • Using an unfolding motion along the top edge of the tablet, carefully separate the front panel from the back case.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Samantha Damewood

Member since: 10/29/16

961 Reputation

5 Guides authored

Badges: 15

+12 more badges

Team

Baylor, Team 5-8, Williams Fall 2016 Member of Baylor, Team 5-8, Williams Fall 2016

BU-WILLIAMS-F16S5G8

3 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 38