Introduction

If the keypad has stuck buttons or is unresponsive, you'll need to remove it and clean it or replace it entirely. Follow this guide to do so.

Parts

No parts required.

  1. Remove the battery cover by pushing downwards and sliding the cover away from the device.
    • Remove the battery cover by pushing downwards and sliding the cover away from the device.

  2. Use a TA20 screwdriver to remove the screw in the center of the battery slot.
    • Use a TA20 screwdriver to remove the screw in the center of the battery slot.

    • Carefully wedge the flat metal spudger between the two sides of the remote until they separate. An intermediate amount of force will be needed to separate the pieces.

    • Remove the buttons.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jackey Lau

Member since: 10/17/2017

301 Reputation

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 54