IBM ThinkPad T42 Speakers Replacement

Step 1 Bottom cover

• Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.
Step 2 Rear screws

• Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)
Step 3 Keyboard and Trackpad
• Flip the laptop over and open the screen to access the keyboard and trackpad.
• The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
• The bezel and keyboard will be loose, be careful.
Step 4
• Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
• Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
Step 5 Lower Bracket
• Grasp the metal bracket to remove it from the device.
Step 6 Microphone cover
• Remove the rubber cover from the microphone.
Step 7 Speakers
• This component is free to move.
Step 8
• Disconnect its connector and pull it out carefully.

Author

with 5 other contributors

Gerald Watanabe

Member since: 04/14/10

279 Reputation

7 Guides authored

Badges: 14

• 
• 
• 

+11 more badges

Team

Cal Poly, Team 29-76, Johann Spring 2010 Member of Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Members

35 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview