Introduction
Use this guide to replace the old battery in your Huawei P9 Lite.
What you need
-
-
Use an opening pick to unclip the rear cover, starting from the bottom corner.
-
Work your way around counterclockwise and carefully pry the plastic tabs open one by one.
-
-
-
-
On the bottom of the phone remove the following screws:
-
Three 2.9 mm Phillips #00 screws
-
Four 3.8 mm Phillips #00 screws
-
Now you can grab the loudspeaker unit and take it out.
-
-
-
Use a spudger to disconnect the fingerprint sensor from the motherboard.
-
Peel the NFC antenna cable off of the metal plate.
-
-
Tool used on this step:Tesa 61395 Tape$5.99
-
Slide the spudger under the battery at the place shown in the picture and pry it loose slowly.
-
When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.
-