Introduction

Volume and power buttons ribbon cable replacement

  1. Remove the back cover.
    • Remove the back cover.

    Add Comment

  2. Remove the battery.
    • Remove the battery.

    Add Comment

    • with the help of a Phillips screwdriver remove the nine side screws, one is under the adhesive that must be removed

    • Remove the 10th screw, it is shorter in the middle near the Sim card slot

    Add Comment

    • With the help of a thin tool, pry laterally on the joints and remove the central body

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Disconnect the display connector.

    Add Comment

    • Disconnect the light sensor connector.

    Add Comment

    • Disconnect the touch screen connector.

    Add Comment

    • Pry out the connector between the two boards

    Add Comment

    • With a thin tool, help us to unhook the motherboard from the joints

    Add Comment

    • Remove the motherboard

    Add Comment

    • With the help of a heat source, remove the audio and power button ribbon cable

    Add Comment

    • Replace with the new component

    Add Comment

Conclusion

To reassemble your device follow these instructions in reverse order.

3 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Smilzo

Member since: 11/09/2013

5,409 Reputation

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 15

All Time: 193