Introduction

Replaceing your hdd

Parts

No parts required.

first take out the Phillips screw out of the side panel and then take off the side panel. first take out the Phillips screw out of the side panel and then take off the side panel.
  • first take out the Phillips screw out of the side panel and then take off the side panel.

Add Comment

After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel. After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.
  • After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.

Add Comment

Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out. Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out. Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.
  • Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.

Add Comment

Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck. Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck. Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.
  • Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.

Add Comment

Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you're done hope you liked it  like it thanks bye. thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys
  • Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you're done hope you liked it like it thanks bye.

  • thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

McOfficialPlayYT

Member since: 02/28/2017

163 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 18