How to replace the connector of an Aeroflex ventilated suspension system. - iFixit Repair Guide

Introduction

A backpack often has to take a lot when you are on the road. Due to frequent use, the connector may break and need to be replaced. Here we show you how to replace a broken connector with a new one and how to get your backpack ready for use again!

What you need

Step 1 Connector-Aeroflex

How to replace the connector of an Aeroflex ventilated suspension system., Connector-Aeroflex: step 1, image 1 of 3

How to replace the connector of an Aeroflex ventilated suspension system., Connector-Aeroflex: step 1, image 2 of 3

How to replace the connector of an Aeroflex ventilated suspension system., Connector-Aeroflex: step 1, image 3 of 3

Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!

Step 2

How to replace the connector of an Aeroflex ventilated suspension system.: step 2, image 1 of 1

First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.
Important: It must click!

Step 3

How to replace the connector of an Aeroflex ventilated suspension system.: step 3, image 1 of 3

How to replace the connector of an Aeroflex ventilated suspension system.: step 3, image 2 of 3

How to replace the connector of an Aeroflex ventilated suspension system.: step 3, image 3 of 3

Then press the wire frame into the other side.
Important: It must click!

Conclusion

Finished! You did it.

Special thanks to these translators:

de en

100%

Daniel Schmid

vet121

Maria Parker

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

Daniel Schmid

Member since: 02/22/16

387 Reputation

13 Guides authored

Team

Vaudesport Member of Vaudesport

Community

3 Members

96 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 17

All Time: 320