How to replace a QMR Rail-Hook on a bike bag. (new bike bag)

Free Shipping on Domestic Orders $75+

Introduction

A QMR Rail Hook on your hardback panel (attachment hook on the rack) is responsible for the correct positioning of the bike bag on your rack. It can be re-attached or replaced in a few easy steps.

What you need

Step 1 QMR Rail-Hook

How to replace a QMR Rail-Hook on a bike bag. (new bike bag), QMR Rail-Hook: step 1, image 1 of 1

To remove the broken buckle, you will need a large flat head screwdriver.

Translate

Step 2

Disassemble: Unscrew the orange dial and remove the damaged QMR rail hook and wire spring.

Translate

Step 3

Pry out the washer using two flat head screwdrivers.

Translate

Step 4

Push the new washer in and use the screwdriver to move it into place. Place the threaded oval plate and wire spring directly on top of each other. The hole of the threaded plate must be directly above the hole of the washer. Screw on the new QMR Rail Hook.
Please note: The QMR rail hook must click into place — then you’ll know it is correctly threaded.