How to disassemble the Cover Plates of the Canon Powershot SD790 IS Digital Camera

You're viewing a previously published version of this guide. View latest version

Jan 28, 2014 - 02:40:12

Feb 15, 2024 - 08:29:41 Feb 15, 2024 - 08:29:41 Feb 15, 2024 - 08:29:27 Feb 14, 2024 - 10:50:12 Dec 15, 2022 - 12:17:14 Dec 15, 2022 - 12:16:59 Dec 15, 2022 - 12:16:06 Nov 21, 2022 - 02:15:18 Nov 21, 2022 - 02:11:16 Nov 21, 2022 - 02:11:04 Nov 21, 2022 - 02:09:14 Nov 21, 2022 - 02:00:22 Nov 21, 2022 - 01:57:58 Nov 21, 2022 - 01:57:43 Nov 21, 2022 - 01:34:25 Nov 21, 2022 - 01:32:40 Nov 21, 2022 - 01:32:25 Nov 21, 2022 - 01:28:48 Nov 09, 2022 - 02:58:47 Jul 30, 2014 - 01:04:42 Jan 28, 2014 - 02:40:12 Sep 27, 2013 - 09:36:21 Sep 27, 2013 - 09:36:00 Mar 25, 2011 - 05:00:33 Mar 25, 2011 - 04:56:41 Mar 25, 2011 - 04:54:57 Mar 25, 2011 - 04:53:31 Mar 20, 2011 - 03:02:46 Mar 07, 2011 - 11:21:53 Mar 07, 2011 - 11:21:52 Mar 07, 2011 - 11:08:08 Mar 07, 2011 - 11:08:06 Mar 07, 2011 - 11:58:42 Mar 07, 2011 - 11:57:20 Mar 07, 2011 - 11:57:18 Mar 07, 2011 - 11:57:17 Mar 07, 2011 - 11:54:38

Newer

Introduction

This guide will help you to remove the cover plates from your Canon digital camera.

Step 1 The plastic housing

How to disassemble the Cover Plates of the Canon Powershot SD790 IS Digital Camera, The plastic housing: step 1, image 1 of 3

How to disassemble the Cover Plates of the Canon Powershot SD790 IS Digital Camera, The plastic housing: step 1, image 2 of 3

How to disassemble the Cover Plates of the Canon Powershot SD790 IS Digital Camera, The plastic housing: step 1, image 3 of 3

Using a Tri-Wing screwdriver #0, remove the screws from the sides of the camera.
There are two on each side, and two on the bottom plate.

Step 2

Gently grip and remove the side cover while holding the Mini-USB cover open.

Step 3

How to disassemble the Cover Plates of the Canon Powershot SD790 IS Digital Camera: step 3, image 3 of 3

Grip the camera from the sides and carefully remove the screen cover. Start at the bottom edge and slowly lift up the cover. Pay special attention to the area with the camera/video switch.
While still gripping the sides, remove the front cover. Again, start at the bottom edge and slowly lift up the cover. Once you are done with the screen cover, remove the screw by the power switch that is anchoring the side plate and the sides will come off.