Introduction

If coffee is only coming out of one spout or the knob isn't having any effect on the volume of crema, a cleaning may be in order. This guide will show you how to disassemble, clean and reassemble the spout.

  1. Remove the spout by pressing the button on top and sliding it towards you.
    • Remove the spout by pressing the button on top and sliding it towards you.

    • Unscrew the two PH#1 screws on the back of the spout.

    • The spout halves should now separate easily but light prying might be necessary.

    Add Comment

  2. Remove the spring of the pushbutton. Relaese the Button and remove the black insert off the cup filler.
    • Remove the spring of the pushbutton. Relaese the Button and remove the black insert off the cup filler.

    • Push off the metal chrome part.

    • Clean it with a small brush and rinse it under water.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Reinstall the metal part on the back cup filler part then insert the black piece.

    • Hold up the black part a little for pushing in the Button.

    • Then click it trogether and push in the spring.

    Add Comment

    • Click it together, put in the two screws and you are done. :)

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Schwarzstein

Member since: 07/15/2013

2,287 Reputation

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 44

All Time: 2,098