Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

If you have an old basketball net that needs replacing, check out this guide!

Tools

No tools specified.

Parts

  1. Set up a ladder below the basketball rim.
    • Set up a ladder below the basketball rim.

    • Make sure the ladder is steady and placed on a level surface.

  2. Loop the first net loop through the basketball rim. Push the net through each loop on the basketball rim. Pull the net loop down and spread the rope across the rim coil as shown
    • Loop the first net loop through the basketball rim.

    • Push the net through each loop on the basketball rim.

    • Pull the net loop down and spread the rope across the rim coil as shown

    • Pull the net tightly to the rim.

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Shop Now

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Shop Now
  4. Using the same technique from step 2, loop the remaining net loops around the rim.
    • Using the same technique from step 2, loop the remaining net loops around the rim.

  5. Test the net and remove any wrinkles by pulling down on the bottom of the net.
    • Test the net and remove any wrinkles by pulling down on the bottom of the net.

  6. Step down from the ladder and play ball.
    • Step down from the ladder and play ball.

Kevin A Walker

Member since: 02/24/2015

143 Reputation

1 Guide authored

Team

Cal Poly, Team 23-3, Green Winter 2015 Member of Cal Poly, Team 23-3, Green Winter 2015

CPSU-GREEN-W15S23G3

6 Members

13 Guides authored

View Statistics:

Past 24 Hours: 20

Past 7 Days: 119

Past 30 Days: 755

All Time: 79,579