Introduction

If you need to access laptop internals such as the RAM, hard drive, or the motherboard, this guide will show you how to safely open the laptop for access to these components.

Parts

No parts required.

  1. Flip the laptop over, such that the bottom of the laptop is facing upwards.
    • Flip the laptop over, such that the bottom of the laptop is facing upwards.

    • Ensure that the laptop is powered off prior to following this guide.

    Add Comment

  2. Pull the latch to the right of the battery to the right.
    • Pull the latch to the right of the battery to the right.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pull the latch to the left of the battery to the left. Hold the latch open with a finger to prevent it from closing.

    Add Comment

    • While holding the second latch from the previous step, use another hand to reach underneath the battery.

    • Pull the battery upwards and away from the laptop to remove it.

    Add Comment

    • Using a phillips J00 screwdriver, unscrew the two 2.5 mm screws on either side of the laptop panel.

    • The head size of these screws is 2.5 mm, the length is 5 mm.

    Add Comment

    • Remove the panel by pushing away from the laptop until the panel is free of the laptop.

    • Lift to remove the panel.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Elliott Beckner

Member since: 11/05/2018

129 Reputation

2 Guides authored

Team

IUPUI, Team S2-G1, Baechle Fall 2018 Member of IUPUI, Team S2-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G1

4 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 10

All Time: 10