How To Fix A Hole In Khaki Pants

Step 1 How To Fix A Hole In Khaki Pants

• Examine the damaged area.
• Make sure to clean all the debris from the tear.
Step 2

• Flip your pants inside out.
Step 3
• Pinch hole together.
• Make sure there is no gaps showing.
Step 4
• Pin needle and thread through pants.
• Use more thread than needed so you will have enough.
• Make sure your hand is not directly behind the needle where you are poking. This will prevent you from pricking yourself.
Step 5
• Pull needle and thread through pants until there is only 2 inches of thread left.
• Tie a knot at the end of the remaining 2 inches.
• It can be any measurement, but 2 inches makes it easier to tie a knot without wasting too much thread.
Step 6
• Take the needle and pin it through right next to the previous spot.
• Pull all the way through until thread is tight.
• Repeat this process until you reach the end of the hole.
Step 7
• Wrap the thread three times around the needle.
• Pull the needle until the thread is tight.
• This will tie a knot at the end.
Step 8
• Take the scissors and cut the excess string remaining.
Step 9
• Now put your khaki pants on because they are now wearable again and practically new!

Author

with 4 other contributors

Calvin Roth

Member since: 09/27/15

291 Reputation

1 Guide authored

Badges: 7

• 
• 
• 

+4 more badges

Team

Cal Poly, Team 17-1, Green Fall 2015 Member of Cal Poly, Team 17-1, Green Fall 2015

CPSU-GREEN-F15S17G1

4 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview