Skip to main content

Hover-1 XLS Back Seat Light Replacement

What you need

  1. Hover-1 XLS Back Seat Light Replacement, Back Seat Light: step 1, image 1 of 2 Hover-1 XLS Back Seat Light Replacement, Back Seat Light: step 1, image 2 of 2
    • Remove the seat by removing the six 16mm screws with a Phillips #2 screwdriver.

    • Remember that the seat is still connected by the wiring once you unscrew it. Pulling too hard can damage the connector.

  2. Hover-1 XLS Back Seat Light Replacement: step 2, image 1 of 3 Hover-1 XLS Back Seat Light Replacement: step 2, image 2 of 3 Hover-1 XLS Back Seat Light Replacement: step 2, image 3 of 3
    • Disconnect the wires by pushing the levers on either side of the connector and on top.

    • Remove the seat from the bike.

  3. Hover-1 XLS Back Seat Light Replacement: step 3, image 1 of 1
    • Use a Phillips #2 screwdriver to remove the four 10mm screws on the bottom of the back seat.

  4. Hover-1 XLS Back Seat Light Replacement: step 4, image 1 of 2 Hover-1 XLS Back Seat Light Replacement: step 4, image 2 of 2
    • Pull the light from behind the bottom of the seat frame. Pull the wiring all the way through.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Christian Roberts

Member since: 01/24/19

248 Reputation

1 Guide authored

Team

Cal Poly, Team S1-G2, White Winter 2019 Member of Cal Poly, Team S1-G2, White Winter 2019

CPSU-WHITE-W19S1G2

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 331