Introduction

This guide will walk you through the process of replacing the cord in the case of having a frayed or broken cord.

  1. Remove the two black 6mm screws.
    • Remove the two black 6mm screws.

  2. Slide the black O-ring out of its channel and pull it off the end of the flat iron.
    • Slide the black O-ring out of its channel and pull it off the end of the flat iron.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Separate the top and bottom pieces of the shell. It may require some force to break the seal.
    • Separate the top and bottom pieces of the shell. It may require some force to break the seal.

  5. Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.
    • Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ben Miller

Member since: 10/24/2016

203 Reputation

1 Guide authored

Team

IUPUI, Team 3-4, Baechle Fall 2016 Member of IUPUI, Team 3-4, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G4

4 Members

5 Guides authored

One Comment

Where can I get a replacement cord? You only show how to removed it but not how to fix it

Noe Salazar - Reply

View Statistics:

Past 24 Hours: 2

Past 7 Days: 15

Past 30 Days: 67

All Time: 2,204