Introduction

Over time your Hoovers filters will get dirty and may eventually need to be replaced. This guide will show you how to do this in a few easy steps!

  1. Put the cleaner into the upright position, turn off the power and unplug the power cord.
    • Put the cleaner into the upright position, turn off the power and unplug the power cord.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the dirt cup from the cleaner.
    • Remove the dirt cup from the cleaner.

    • Twist the top of the dirt cup to open it and reveal the rinsable filter.

    Add Comment

    • Remove the rinsable filter from the dirt cup.

    • If the rinsable filter is dirty, rinse it with water for 2 minutes or until the water runs clear.

      • Squeeze out excess water and allow to dry for 24 hours.

        • Never put a wet filter back into the cleaner.

    Add Comment

Finish Line

Spencer Nefores

Member since: 09/26/2017

201 Reputation

2 Guides authored

Team

Cal Poly, Team S7-G2, Banghart Fall 2017 Member of Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 5

All Time: 111