Skip to main content

Introduction

This guide is intended to help you remove your dust filter. This filter can be rinsed if dirty, or replaced if old or dysfunctional. This step should stard with the vacuum unplugged.

Tools

Parts

No parts specified.

  1. Push silver tab located towards top of vacuum to remove dirt cup from vacuum. Press the tab below the Hoover logo to open the lid of dirt cup.
    • Push silver tab located towards top of vacuum to remove dirt cup from vacuum.

    • Press the tab below the Hoover logo to open the lid of dirt cup.

  2. Remove the filter from the top.
    • Remove the filter from the top.

    • Rinse under tap water, dry for 24 hours in the sun, and put back in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sophia Stockburger

Member since: 01/22/2018

530 Reputation

5 Guides authored

Team

Cal Poly, Team S11-G2, Banghart Winter 2018 Member of Cal Poly, Team S11-G2, Banghart Winter 2018

CPSU-BANGHART-W18S11G2

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 38

All Time: 556