Introduction

This guide will help you into replacing the inlet filter in the body of the vacuum.

Tools

Parts

No parts required.

  1. Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body. Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.
    • Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Locate the large sieve at the bottom of the vacuum body. Lift off the sieve, separating it from the filter.
    • Locate the large sieve at the bottom of the vacuum body.

    • Lift off the sieve, separating it from the filter.

  4. Remove the old inlet filter from the vacuum body and replace with the new filter.
    • Remove the old inlet filter from the vacuum body and replace with the new filter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Member since: 01/18/2018

241 Reputation

2 Guides authored

Team

Cal Poly, Team S12-G4, Banghart Winter 2018 Member of Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 43