Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will show you how to replace the internal switch inside the handle. This guide will be identical to the motherboard guide with a few extra steps. This would be needed if the power button is no longer working in the handle.

  1. Remove the single 15mm Phillips #1 screw from the handle.
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Remove the handle by pulling it up.
    • Remove the handle by pulling it up.

  3. Remove two 15mm Phillips #1 screws from the handle.
    • Remove two 15mm Phillips #1 screws from the handle.

  4. Use a plastic opening tool to carefully pry the black cover off of the handle. Use a plastic opening tool to carefully pry the black cover off of the handle.
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Remove five 15mm Phillips #1 black screws from the handle. Remove five 15mm Phillips #1 black screws from the handle.
    • Remove five 15mm Phillips #1 black screws from the handle.

  7. Remove the silver plastic cover using the plastic opening tool. Remove the silver plastic cover using the plastic opening tool.
    • Remove the silver plastic cover using the plastic opening tool.

  8. Remove the black rubber cover from the motherboard.
    • Remove the black rubber cover from the motherboard.

  9. Remove two 8mm Phillips #1 screws from the motherboard.
    • Remove two 8mm Phillips #1 screws from the motherboard.

  10. Carefully pull the motherboard out with its attached wires. Carefully pull the motherboard out with its attached wires.
    • Carefully pull the motherboard out with its attached wires.

  11. Replace the power button. Replace the power button.
    • Replace the power button.

Mark Nelson

Member since: 01/25/2018

392 Reputation

2 Guides authored

Team

USF Tampa, Team S7-G4, Passmore Spring 2018 Member of USF Tampa, Team S7-G4, Passmore Spring 2018

USFT-PASSMORE-S18S7G4

4 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 18

All Time: 371