Honeywell HY-204 Rotation Motor Replacement

You're viewing a previously published version of this guide. View latest version

Sep 06, 2019 - 11:41:58

Sep 06, 2019 - 11:42:27 Sep 06, 2019 - 11:41:58 Dec 07, 2018 - 11:19:24 Jan 11, 2015 - 06:36:20 Dec 19, 2014 - 12:05:48 Dec 19, 2014 - 12:05:47 Nov 23, 2014 - 02:49:03 Nov 23, 2014 - 02:48:27 Nov 23, 2014 - 02:46:10 Nov 23, 2014 - 02:45:57 Nov 23, 2014 - 02:40:02 Nov 23, 2014 - 02:39:42 Nov 23, 2014 - 02:39:33 Nov 23, 2014 - 02:39:33 Nov 23, 2014 - 02:24:00 Nov 23, 2014 - 02:23:26 Nov 23, 2014 - 02:22:39 Nov 23, 2014 - 02:21:13 Nov 23, 2014 - 02:19:27 Nov 23, 2014 - 02:19:09 Nov 23, 2014 - 02:17:16 Nov 23, 2014 - 02:16:54 Nov 23, 2014 - 02:16:00 Nov 23, 2014 - 02:13:53 Nov 23, 2014 - 02:13:53 Nov 23, 2014 - 02:12:19 Nov 23, 2014 - 02:10:51 Nov 23, 2014 - 02:10:50 Nov 23, 2014 - 02:08:30 Nov 23, 2014 - 02:08:30 Nov 23, 2014 - 02:04:46 Nov 23, 2014 - 02:02:47 Nov 23, 2014 - 02:02:47 Nov 23, 2014 - 02:00:29 Nov 23, 2014 - 01:57:09

Newer

Introduction

This guide will walk you through the steps to remove your rotation motor. Though disassembly is simple, it is a difficult process to put back together because you have to solder wires or use a wire connector to reattach a new rotation motor.

What you need

Step 1 Rotation Motor

Honeywell HY-204 Rotation Motor Replacement, Rotation Motor: step 1, image 1 of 1

Before you begin, be sure to unplug the fan.
Lay fan on the ground and use your fingers peel the three feet off the bottom of the fan.

Step 2

Remove the three 12mm screws using the Phillips #0 Screwdriver.

Step 3

Remove the two 10mm screws using the Phillips #0 Screwdriver.

Step 4

Move the rotation motor left and right to reveal the screw connecting it to the fan.
Remove the 18mm screw from the side of the motor using the Phillips #0 Screwdriver.

Step 5

Using the wire cutters, severe the wires connecting the rotation motor to the fan.
To put back together you will need to resolder or use wire connectors to reattach motor.