Introduction

After extended use, the speakers might lose sound quality and require replacement.

  1. Remove the back cover of the device using a combination of both plastic opening tools.
    • Remove the back cover of the device using a combination of both plastic opening tools.

    • Use your plastic opening tool to pry open a corner of the device. Continue using the tool down the side of the device to open it completely.

  2. Remove the black tape located to the left of the device.
    • Remove the black tape located to the left of the device.

    • Use a Phillips head #00 screwdriver to remove the two 4.43mm screws on the bottom that keep the speakers in place.

    • Unsolder the red and black wires connecting the speaker to the motherboard. Take a look at this guide to learn how to solder and unsolder connections.

    • Use the spudger tool to remove the speaker panel carefully.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katharina

Member since: 02/23/2015

478 Reputation

2 Guides authored

Team

USF Tampa, Team 1-2, Leahy Winter 2015 Member of USF Tampa, Team 1-2, Leahy Winter 2015

USFT-LEAHY-W15S1G2

3 Members

10 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 5

All Time: 441