Introduction

After years of service your battery may be weak or no longer hold a charge. This guide replaces your battery with a new one.

  1. Remove the two 3mm screws using a PH00 screwdriver.
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Use the blue plastic opening tool to gently pry the back case off.
    • Use the blue plastic opening tool to gently pry the back case off.

    • Disconnect the wires that connect the battery to the motherboard using the spudger.

    • Slide the spudger underneath the battery and gently lift it off of the adhesive.

    • Place the new battery in the same location and connect the wires the same way as the previous battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brandon Snodgrass

Member since: 01/29/2015

410 Reputation

4 Guides authored

Team

Clemson, Team 15-8, Shirley Winter 2015 Member of Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Members

12 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

All Time: 574