Fix Your Stuff Community Store

Hasbro Bop-It Micro Series Back Case Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prerequisite Only

What you need

  1. Hasbro Bop-It Micro Series Back Case Replacement, Back Case: step 1, image 1 of 1

    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

    Edit

  3. Hasbro Bop-It Micro Series Back Case Replacement: step 2, image 1 of 1

    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

    Edit

  4. Hasbro Bop-It Micro Series Back Case Replacement: step 3, image 1 of 1

    • Carefully separate the two sections, leaving them connected by the wires.

    Edit
Finish Line

One other person completed this guide.

Author

with 7 other contributors

James Schnabel

Member since: 09/29/16

139 Reputation

2 Guides authored

Badges: 13

+10 more badges

Team

IUPUI, Team 3-1, Harley Fall 2016 Member of IUPUI, Team 3-1, Harley Fall 2016

IUPUI-HARLEY-F16S3G1

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 47