Introduction

The Hannspad has a deceptive back panel that will not separate. Dont lose hope; it is not the real back panel, it is just there for aesthetics. The actual way to take the back panel off is at the seam around the edge of the screen. Follow these steps to protect your screen, and easily take the back panel off your Hannspad.

Parts

No parts required.

Image 1/1: Place the tablet screen side up.
  • Turn the device off.

  • Place the tablet screen side up.

  • Make sure the device is turned off to avoid damage.

Add Comment

Image 1/2: Plastic tabs Image 2/2: Be careful, as the plastic tabs are delicate.
  • Use the metal spudger to press an opening between screen and back cover.

  • Plastic tabs

  • Be careful, as the plastic tabs are delicate.

Add Comment

Image 1/1:
  • Wedge the plastic opening tool between the screen and the back panel to keep tension constant.

Add Comment

Image 1/2: Image 2/2:
  • Slide the metal spudger around the casing to separate it from the inside of the tablet.

Add Comment

Image 1/2: Remove the back panel by delicately lifting straight up. Image 2/2: Remove the back panel by delicately lifting straight up.
  • After all the tabs are separated, flip tablet over so the screen side is down.

  • Remove the back panel by delicately lifting straight up.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

matthew vandeventer

Member since: 03/11/2015

824 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 28

All Time: 1,275