Parts

No parts required.

Image 1/1:
  • Take the back cover off the phone and take the battery out.

Add Comment

Image 1/1:
  • Take a SL#2.5 screwdriver and pop the black piece off shown here.

Add Comment

Image 1/1:
  • Take a T5 screwdriver and unscrew the two screws seen here

Add Comment

Image 1/1:
  • Unscrew the two screws on the back of the phone with a T5 screwdriver

Add Comment

Image 1/2: The phone should now look like the second picture
  • Take the SL#2.5 screwdriver and pry off the back cover

  • The phone should now look like the second picture

Add Comment

Image 1/2: Then pry off the circuit circled in red on the second picture
  • Next lift up the camera lens from the board.

  • Then pry off the circuit circled in red on the second picture

Add Comment

Image 1/1: The circuit board should now be detached from the LCD part of the phone
  • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

  • The circuit board should now be detached from the LCD part of the phone

Add Comment

Image 1/1:
  • Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone

Add Comment

Image 1/2: The screen should come out with ease and be completely detached from the rest of the cover.
  • Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover

  • The screen should come out with ease and be completely detached from the rest of the cover.

Add Comment

  • Replace screen with a new one.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment