1. Slide the bottom back casing off, pulling down.
    • Slide the bottom back casing off, pulling down.

    Add Comment

  2. Using the plastic tool, pry underneath the top plastic cover.
    • Using the plastic tool, pry underneath the top plastic cover.

    Add Comment

    • Using a metal spudger, pry up the plastic piece covering the motherboard, and remove the sticker.

    Add Comment

    • Use a Philip #0 screwdriver to remove the four screws of the plastic covering the motherboard.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using tweezers, remove the yellow ribbon by gently pulling on it.

    Add Comment

    • Using the plastic tweezers, gently lift the blue flaps up.

    Add Comment

    • Using your thumb, push the flap up on the top.

    • Using your thumb, push the flap up on the bottom of the motherboard.

    Add Comment

    • Using a Phillips #00 screwdriver, unscrew the four screws in each corner of the motherboard.

    Add Comment

    • Carefully remove the motherboard from the base of the phone.

    Add Comment

    • Gently push the base of the phone from the frame.

    Add Comment

    • Using the metal spudger, remove the battery from the base.

    Add Comment

    • Using tweezers, lift the secondary motherboard from the base of the phone.

    • The speaker is located on the back of the board.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kelsey Harris

Member since: 10/08/2014

121 Reputation

1 Guide authored

Team

USF Tampa, Team 9-6, Leahy Fall 2014 Member of USF Tampa, Team 9-6, Leahy Fall 2014

USFT-LEAHY-F14S9G6

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 266