Skip to main content

HP Stream 13-c110nr Heat Sink Replacement

What you need

  1. HP Stream 13-c110nr Heat Sink Replacement, Keyboard Assembly: step 1, image 1 of 1
    • Close the device.

    • Remove AC adapter plug from electrical outlet.

    • Remove AC adapter from device.

    • Turn the device off.

    • Unplug all external devices from device.

    • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

  2. HP Stream 13-c110nr Heat Sink Replacement: step 2, image 1 of 1
    • Turn the device upside down with the back facing towards you.

  3. HP Stream 13-c110nr Heat Sink Replacement: step 3, image 1 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 3, image 2 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 3, image 3 of 3
    • Use a pick to remove the two (2) large computer feet along the back edge of the device.

    • Use a pick to remove the two (2) small computer feet.

    • Use a pick to remove the one (1) screw cover.

    • Place rubber computer feet in safe place for reassembly.

  4. HP Stream 13-c110nr Heat Sink Replacement: step 4, image 1 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 4, image 2 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 4, image 3 of 3
    Tool used on this step:
    Magnetic Project Mat
    $19.95
    Buy
    • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

    • Place the thirteen (13) screws on magnetic mat for reassembly.

  5. HP Stream 13-c110nr Heat Sink Replacement: step 5, image 1 of 1
    • Turn the device over with the front facing towards you.

    • Open the device as shown.

  6. HP Stream 13-c110nr Heat Sink Replacement: step 6, image 1 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 6, image 2 of 3 HP Stream 13-c110nr Heat Sink Replacement: step 6, image 3 of 3
    • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

    • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

  7. HP Stream 13-c110nr Heat Sink Replacement: step 7, image 1 of 1
    • Disconnect the Touchpad cable.

  8. HP Stream 13-c110nr Heat Sink Replacement: step 8, image 1 of 2 HP Stream 13-c110nr Heat Sink Replacement: step 8, image 2 of 2
    • Disconnect the Keyboard Cable.

  9. HP Stream 13-c110nr Heat Sink Replacement: step 9, image 1 of 2 HP Stream 13-c110nr Heat Sink Replacement: step 9, image 2 of 2
    • Disconnect the Power connector cable.

  10. HP Stream 13-c110nr Heat Sink Replacement: step 10, image 1 of 1
    • Remove the Keyboard/Top Cover from the device.

  11. HP Stream 13-c110nr Heat Sink Replacement, Battery Assembly: step 11, image 1 of 2 HP Stream 13-c110nr Heat Sink Replacement, Battery Assembly: step 11, image 2 of 2
    • Use a pick to detach the Battery assembly cable.

  12. HP Stream 13-c110nr Heat Sink Replacement: step 12, image 1 of 2 HP Stream 13-c110nr Heat Sink Replacement: step 12, image 2 of 2
    • Remove eight (8) Phillips P0 PM2.0x3.0 mm screws from Battery assembly.

    • Place eight (8) screws on magnetic mat for reassembly.

  13. HP Stream 13-c110nr Heat Sink Replacement: step 13, image 1 of 1
    • Remove Battery Assembly from device.

  14. HP Stream 13-c110nr Heat Sink Replacement, Heat Sink: step 14, image 1 of 2 HP Stream 13-c110nr Heat Sink Replacement, Heat Sink: step 14, image 2 of 2
    • Remove two (2) Phillips P0 PM2.0x2.0 mm screws.

    • Place two (2) screws on magnetic mat for reassembly.

  15. HP Stream 13-c110nr Heat Sink Replacement: step 15, image 1 of 1
    • Remove the Heat Sink from the System Board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 128