Skip to main content

Introduction

This guide will tell you how to replace the optical drive for the HP ProBook 450 G3.

Parts

No parts specified.

  1. Remove the 2.5 torx screw.
    • Remove the 2.5 torx screw.

    • Pivot the spudger between the hard-drive and the optical drive. Push the optical drive away from the center of the computer.

  2. Using the spudger carefully place the pointed end into the gap that covers the optical drive.
    • Using the spudger carefully place the pointed end into the gap that covers the optical drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jingyuan Zhang

Member since: 10/20/2017

554 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 13

All Time: 1,431