Introduction

If the printhead is bad, it will reflect on the quality of the printing. The printhead holds the ink and transfers characters and images tot he paper. If the printing quality is not acceptable, the printhead may need replacement.

Open the top of the printer as shown.
  • Open the top of the printer as shown.

  • Locate the ink cartridges housed by the printhead.

Add Comment

Remove each ink cartridge by pushing the tab and lifting the cartridge. Set all 5 cartridges aside.
  • Remove each ink cartridge by pushing the tab and lifting the cartridge.

  • Set all 5 cartridges aside.

Add Comment

Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead. Lift the lever located on the right side of the printhead.
  • Lift the lever located on the right side of the printhead.

Add Comment

Lift the printhead and remove it. Lift the printhead and remove it.
  • Lift the printhead and remove it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Laura

Member since: 10/23/2014

619 Reputation

3 Guides authored

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Member of Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 14

Past 30 Days: 83

All Time: 2,497