Skip to main content

Introduction

A guide to take off the back panel on an HP Pavilion dv7t-7000.

Parts

No parts specified.

  1. Turn the computer off and disconnect if from all power sources.
    • Turn the computer off and disconnect if from all power sources.

  2. Slide the battery release switch to the left.
    • Slide the battery release switch to the left.

  3. Hold the release switch all of the way to the left and your other hand to pull the battery out.
    • Hold the release switch all of the way to the left and your other hand to pull the battery out.

  4. Unscrew the single Phillips #00 screw.
    • Unscrew the single Phillips #00 screw.

    • Screw will not come out, it is connected to the panel

  5. Remove service hatch by sliding away from the computer and lifting up. Remove service hatch by sliding away from the computer and lifting up.
    • Remove service hatch by sliding away from the computer and lifting up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 199