Introduction

The guide will show you how to remove the device back plate.

Ensure the device is powered down and unplugged.
  • Ensure the device is powered down and unplugged.

  • Turn the device upside down with the battery compartment facing you.

  • Slide the black slider to the right and lift the battery out of its compartment.

Add Comment

Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.
  • Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.

    • These screws do not completely detach from the device when unscrewed.

Add Comment

Use the plastic opening tool to lift up the back plate and set it aside. Use the plastic opening tool to lift up the back plate and set it aside.
  • Use the plastic opening tool to lift up the back plate and set it aside.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris Apple

Member since: 04/14/2014

221 Reputation

2 Guides authored

Team

Cal Poly, Team 12-34, Maness Spring 2014 Member of Cal Poly, Team 12-34, Maness Spring 2014

CPSU-MANESS-S14S12G34

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 951