Introduction

The purpose of this guide is to give the necessary steps to remove your device battery.

  1. Make sure the computer is completely powered down and unplug the power cord.
    • Make sure the computer is completely powered down and unplug the power cord.

  2. Place the device on your work surface with bottom facing up and the battery located at the top.
    • Place the device on your work surface with bottom facing up and the battery located at the top.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Slide the left release tab toward the center of the computer to the unlock position. Next slid the right tab toward the center of the computer and hold it there while completing step 4.
    • Slide the left release tab toward the center of the computer to the unlock position. Next slid the right tab toward the center of the computer and hold it there while completing step 4.

  5. Remove the battery by sliding it upwards and away from the computer.
    • Remove the battery by sliding it upwards and away from the computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gregory Bridge

Member since: 10/24/2017

623 Reputation

6 Guides authored

Team

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 209